Water Wise B3 Bare Shaft Hydraulic Water Pump Kit 100mm (4") x 80mm (3") - CW or CCW Rotation-Clockwise (CW)

The B3 water pump is cast iron with a 100mm (4”) suction and a 80mm (3”) discharge and an output capacity of up to 2800 litres per minute direct coupled to a hydraulic gear motor (1" or 1 1/2” Gear Width 2000 RPM @ 2000 psi, 80 - 106 LPM)

ROTATION

Clockwise or Counterclockwise Rotation - Please select when adding to cart

Which direction should my pump be spinning?
Water pumps rotate either clockwise or counterclockwise as viewed from the drive shaft end of the pump. To determine rotation direction position the pump with the shaft end facing yourself. If the outlet of the pump is facing 90 degrees to the right, straight down on the right side of the pump centerline, or straight up on the left side of the pump centerline, then it is a clockwise rotation pump.

If the outlet of the pump is facing 90 degrees to the left, straight down on the left of the pump centerline, or straight up on the right side of the pump centerline, it is a counterclockwise pump

 

FEATURES 

• Steel keyed Shaft
• Grooved Suction and Discharge
• Maximum Dynamic Head 27 metres
• Impeller Diameter 230 mm (9")
• Close Coupled Hydraulic Motor (Screw on hydraulic adapter converts bare shaft water pump to hydraulic drive water pump)
• Gland packed seal
• Fully serviceable with parts support

 

KIT INCLUDES

• 33 cc Hydraulic Drive Gear Motor - Permco (HYD-PGM330)
• Bare Shaft Water Pump, 2800L/min, Clockwise Rotation (P100-080-B3-CW)
• Hydraulic Drive Motor Coupling/ Mount NEW Style (P100-080-B3-HDA)

FITTINGS KITS AVAILABLE

• 80mm (3) Roll Grooved Nipple (080NRGST)
• 80mm (3) Roll Grooved Coupling - Galvanised (080RGCGS)
• 100mm (4) Roll Grooved Nipple (100NRGST)
• 100mm (4) Roll Grooved Coupling - Galvanised (100RGCGS)

Cast iron with 4" suction and 3" discharge - Replaces Berkeley B3ZRM

SHIPPING

Dimensions: 0.500mm (w) x 0.500mm (l) x 0.600mm (h)
Weight: 80kg
Cubic: 0.150000000m3